Improving Yard Utilization and Stacking Capacity Tire Mounted Gantry Crane

• After-sales Service: Provide Solutions Within 6-12 Hours
• Warranty: 12 Month
• Certification: CE, ISO9001
• Condition: New
• Maximum Lifting Weight: >200t
• Maximum Lifting Height: 30-40m
• Model NO.: container crane
• Operation Form: Air Operation+Ground Operation
• Type: Container Gantry Crane
• Main Girder Form: Customized
• Load Capacity: 10-300t
• Span: 7.5-35m
• Travelling Speed: 0-80m/Min
• Hoisting Speed: 0-45m/Min
• Transport Package: General Mechanical Equipment Standard Packaging
• Specification: 40 foot container
• Trademark: Nucrane
• Origin: Henan, China
• Production Capacity: 200 Sets/Year

Product Description

The rubber-tired gantry crane can realize a variety of modes such as straight travel, diagonal travel, horizontal travel, in-situ rotation, Ackerman steering, etc.
It has mobility, flexibility, adaptability, high work efficiency, small size occupation area and do not need to lay the rail which are particularly suitable for beam factories with horizontal layout. The rubber Tired gantry crane can work independently or collaborative work by two units.
The crane mainly consists of main beam, support leg, hoisting mechanism, tire walking and braking system, steering mechanism, power system, electrical system, hydraulic system, hydraulic transmission system, cab, control system, safety device, etc.

•  Capacity:  10 tons ~500 tons
•  MBH or Mobile Boat Hauler
•  Hydraulic & Electric drive
•  Full frequency conversion
•  Cabin & Remote control
•  360 degree concentric steering
•  for boat, yacht, material transfer
•  Used in repair yards, shipyards, docks etc.
 

Operation Mode Of Rubber Type Gantry Crane: Wireless remote control, cab. Two operation modes can be both equipped.
 

Environmental Conditions:
1,The power source is three-phase alternating current,rated frequency is 50HZ,rated voltage is 380V.
2,The working environment temperature ranges from -20ºC to +45ºC and the relative humidity is no lower than 95%(with dew).
3,In-service, the wind speed should be no higher than 20m/s; out-of-service, the wind speed should be no higher than 44m/s.
4,The working duty is A6-A7.
5,The gradient of crane traveling floor should be less than 1% and part of that should be no more than 3%.
6,The crane which has the special requirement for working conditions, can be manufactured following the contracts.
 

 

Safety features:
1. Automatic rectify deviation control
2. Weight overload protection device
3. Top quality polyurethane buffer
4. Phase protection
5.Lifting limit switch,cross traveling limit switch,long traveling limit switch
6. Voltage lower protection function
7. Emergency stop system
8. Current overload protection system
9.  Lighting system 
10. Audio and video alarm system
 

After-Sales Service
Our after-sales service provide:
1.14 months warranty when products leave the factory, or 12 months warranty after installation 
2. 2 years spare-parts provided for better maintenance.
3.Professional technical staffs provide installation, commissioning and training services.
4.Delivery with English user manual, parts manual, product certification and other relevant certificates.
5.Technical advisory for any time and Engineers available to service machinery overseas.   

Company profile:
Our company has 1600 employees, including 300 senior and middle-level professional and technical personnel and management personnel. It has more than 1160 sets of production and testing equipment, specializing in the production of fixed, bridge and gantry cranes and small lifting equipment, marine cranes, marine winches, marine winches, starting winches, jib cranes, glass vacuum slings and other lifting equipment. It is a modern manufacturing enterprise integrating R & D, production and sales. Welcome to consult and purchase.